S122 Portable Turning Roll Detailed Specifications
Webb Model S122 Portable Turning Roll with variable speed drive. Forward-reverse-stop switch, rapid advance and potentiometer pendant controls mounted on the end of a 20’ control cable (optional 30’ extension and Forward/Reverse foot switch available).
| Total Turning Capacity(2 Idlers) in Tons | 9 |
| Turning Capacity(1 Idler) in Tons | 6 |
| Weight Capacity, Each Unit, in Tons | 3 |
| Motor Horsepower | ½ |
| Voltage | 110V |
| Speed Range, IPM | 4.5-45 |
| Wheel Face Width | 7” |
| Tires Per Axle | 2 |
| Maximum Working Diameter | 8’ |
| Minimum Working Diameter | 3” |
| Tire Diameter | 12” |
| Wheel Center Spacing | 12 ¼”, 24 ¼”, 36 ¼”, 44 ¾” |
| Height to Top of Tire | 13 7/8” |
| Control Cable Length Optional (30’ Extension Available) | 20’ |
| Power Unit Length | 72 9/16” |
| Power Unit Width | 19 1/8” |
| Idler Unit Length | 57 ½” |
| Idler Unit Width | 12 1/8” |
| Power Unit Shipping Weight | 480lbs |
| Idler Unit Shipping Weight | 300lbs |
| Total Shipping Weight (Approx.) | 780lbs |
